News | BEKO TECHNOLOGIES LTD. UK

Reliable pressure dew points below -40°C with Heat-Of-Compression (HOC) systems without additional heating.

(Read more)

BEKO TECHNOLOGIES UK attended the Air-Tech exhibition at the National Exhibition Centre, Birmingham from 17th – 19th April.

(Read more)

BEKO TECHNOLOGIES have appointed Ace Air NI to be a stockist dealer in Northern Ireland

(Read more)

KP Foods, a part of the United Biscuits group have had issues in recent years with refrigeration dryers failing because of the acidic conditions on site due to ingredients such as acetic acid affecting the internal copper tubing of refrigeration dryers.

(Read more)

We have an opportunity for an experienced Regional Sales Manager (RSM) in the Midlands Region of the UK.

(Read more)

BEKO TECHNOLOGIES launched the BEKOKAT Catalytic Converter in 2008 realising that there would not be a flood of sales but none the less expecting to see a slow take up of the product notably by companies who had a need for 100% oil free or better than ISO 8573 Class 1 quality.

(Read more)

When a plant engineer has to purchase a compressed air dryer his first thought will be what dewpoint is required....If a negative dewpoint is required then a desiccant dryer will be selected....There is a third solution which is mostly ignored or perhaps is not fully understood....

(Read more)

BEKO TECHNOLOGIES started out from one man’s vision to save companies money whilst benefitting the environment.

(Read more)

Please see our latest Newsletter

(Read more)

BEKO TECHNOLOGIES are pleased to announce the launch of the new range of DRYPOINT RA compressed air refrigeration dryers with flow capacity from 20-9000m³/hr and pressure from 4-14 bar(g) and retaining the high inlet temperature capability of the existing range.

(Read more)

Energy costs are high and set to go even higher. The beleaguered factory manager has to try to mitigate the impact of this together with all the other issues of the day that face him or her. Most companies addressed the problem that given 3 compressors 1 was just feeding the leaks in a campaign style activity...end of story...no sadly the leaks will come back or occur in other locations for a variety of reasons such as airline contamination, lack of maintenance just to mention a couple of the many.

(Read more)

BEKO Technologies have launched an upgraded version of their CLEARPOINT filter range. The CLEARPOINT 3E filter elements with 3E being “Energy Efficient Element” covers the range 35-34680 m³/hr at 7 bar with high pressure variants available up to 500 bar.

(Read more)

We have been receiving many calls regarding BEKO appliances making a recall on certain Fridge freezer models. Please be aware we have nothing to do with this company, we are BEKO Technologies and deal in compressed air. Please do not contact us as we will not be able to help.

(Read more)

35 years ago the salesperson selling compressed air generation and treatment equipment had very few tools at his disposal. Many systems were oversized because there was no low cost means of deciding the size of the system so educated guesswork was the order of the day. The only scientific way to determine component sizes was to note all equipment consuming compressed air and then observe the cycles or take a usage factor ie if using a drill it is unlikely that the drill would be in constant use as the hole would normally be drilled to insert a screw or bolt. Even doing this usually led to a calculation which would oversize a system because the biggest sin would be to not have a system with adequate capacity. Air quality was poor relative to today. Filter manufacturers were still focussing on sterile air and process filters rather than the new kid on the block-compressed air. Dryer manufacturers were making fridge dryers with no great attention to power consumption or pressure drop and desiccant dryers were selected on capital cost rather than running costs resulting in more “heatless” dryers purchased but wasting up to 20% of compressed air through purge loss.

(Read more)

BEKO Technologies continue to strive for higher levels of customer service. During the recession which hit industry hard in 2008, BEKO Technologies decided that the only way to do more than just survive would be to increase the satisfaction of our customers and prospective customers when dealing with us.

(Read more)

BEKO Technologies are pleased to announce that all our UK Service personnel have been successful in gaining the full qualifications for the safe handling of refrigerants. J11-F Gas Cat1.

(Read more)

BEKO Technologies have received certification from the GFPS (which translates as the Society for Production Hygiene and Sterility) for the production of amicrobic compressed air using the BEKOKAT catalytic converter which has a principle function of removing hydrocarbons from compressed air.

(Read more)

BEKO Technologies UK are one of the first companies to be F Gas fully registered companies in the UK. The EU Ozone Depletion Regulations have been amended and companies that employ engineers to work with refrigerants now require new qualifications that meet the full requirements of EC/303/2008 for RAC. This is referred to as “the F Gas Regulations”.

(Read more)

BEKO Technologies are world leaders in condensate management, beyond our standard range of BEKOMAT’S BEKO Technologies offer a number of special condensate drains to suit applications that are not adequately covered by the other products in the market. BEKOMAT explosion proof models with ATEX approval are designed for use in explosive, hazardous locations such as off shore, chemical plants and power plants to name a few.

(Read more)

BEKO Technologies UK has now completed the expansion of its site in Bromsgrove, Worcestershire. The site has been increased by 50% incorporating another warehouse designed specifically for holding more stocks of refrigeration dryers and more office space including a new training centre for education and training of employees, customers and dealers. We also have a demonstration room stocked with the latest products and equipment for customers to come and see.

(Read more)